Send alerts to Slack

Connect Uptime Tracker to a Slack channel with Add to Slack (alerts with an Acknowledge button) or an incoming webhook URL. Free on every plan, in a few minutes.

Updated By the Uptime Tracker team
  1. Use Add to Slack (quickest)In Integrations → Add destination, on the Slack card, choose "Add to Slack", pick the channel in Slack and choose Allow. Skip the remaining steps.
  2. Or create a Slack app for a webhookAt api.slack.com/apps choose Create New App, then From scratch. Name it and pick your Slack workspace.
  3. Turn on incoming webhooksOpen Incoming Webhooks in the app settings and switch Activate Incoming Webhooks on.
  4. Add a webhook for the channelChoose Add New Webhook, pick the channel and choose Allow.
  5. Copy the webhook URLCopy the URL from the Webhook URL table. It starts with https://hooks.slack.com/services/.
  6. Add the destinationIn Uptime Tracker go to Integrations → Add destination, find Slack and choose "Use a webhook URL". Enter a Name, paste the Slack incoming webhook URL and choose "Add destination".
  7. Send a testChoose "Send test" under Configured destinations on Integrations → Destinations and check the channel.

Slack alerts are available on every plan, including Free. There are two ways to connect a channel:

  • Add to Slack (recommended): installs the Uptime Tracker Slack app into a channel in one step. Alerts for open incidents carry an Acknowledge button.
  • Incoming webhook URL: you create a small Slack app yourself and paste its webhook URL. Messages are plain, without buttons.

Before you start

  • Any Uptime Tracker plan, and the owner, admin or operator role.
  • Permission to install apps in your Slack workspace. Some Slack workspaces require an admin to approve new apps.
  • For Add to Slack, the Slack app must be available on the server. If the Slack card says Slack app: Unavailable — not configured on this server, use a webhook URL instead.
  • For a private channel, you must be a member of it.

Option 1: Add to Slack

  1. Go to Integrations → Add destination. On the Slack card, choose Add to Slack.
  2. Slack opens. Check the Slack workspace in the top corner, pick the channel that should receive alerts and choose Allow.
  3. You return to Integrations → Destinations with "Slack is connected". The channel appears in the Slack app panel and under Configured destinations as a verified destination.
  4. Choose Send test on the new destination.

To connect more channels, choose Add another channel in the Slack app panel on Integrations → Destinations. Each channel is its own destination that you can test, pause, rename, route or delete like any other.

Acknowledge incidents from Slack

Down, reminder and escalation messages posted by the Slack app have an Acknowledge button. Acknowledging from Slack works exactly like acknowledging in the dashboard: reminders stop, escalation is cancelled and the timeline records who did it. To use it, each person links their Slack user to their Uptime Tracker account once:

  1. Choose Acknowledge on an alert. The first time, Slack shows you a private message with a Link your Slack user link. Nothing is changed yet.
  2. Open the link within 15 minutes, sign in to Uptime Tracker if asked, and choose Link my Slack user.
  3. Go back to Slack and choose Acknowledge again.

Only owners, admins and operators who may change incidents of that monitor can acknowledge; others get a private explanation and nothing changes. Incidents are resolved automatically when the monitor recovers, so there is no resolve button. Your linked Slack users are listed in the Slack app panel, with Unlink.

Remove the Slack app

Delete the channel's destination under Configured destinations on Integrations → Destinations. Deleting the last connected channel of a Slack workspace revokes the app's access. If someone uninstalls the app in Slack instead, its channels show Uninstalled in Slack and stop receiving alerts.

Option 2: Create an incoming webhook in Slack

  1. Go to api.slack.com/apps and choose Create New App, then From scratch.
  2. Enter an app name such as "Uptime alerts", pick your Slack workspace and choose Create App.
  3. In the app's settings, open Incoming Webhooks in the left menu and switch Activate Incoming Webhooks on.
  4. At the bottom of the page choose Add New Webhook (older Slack screens say Add New Webhook to Workspace).
  5. Pick the channel that should receive alerts and choose Allow.
  6. Back on the Incoming Webhooks page, copy the URL in the Webhook URL table. It starts with https://hooks.slack.com/services/.

Treat the URL as a secret: anyone who has it can post to that channel. To alert another channel later, choose Add New Webhook again in the same app; each channel gets its own URL.

Add the webhook in Uptime Tracker

  1. Go to Integrations → Add destination, find Slack and choose Use a webhook URL.
  2. Enter a Name such as "Slack #alerts" (shown in rules and the delivery log).
  3. Paste the Slack incoming webhook URL.
  4. Choose Add destination. Slack destinations are active immediately; there is no verification step.
  5. Choose Send test and check that "Test notification" appears in the channel.

What the messages contain

A bold title such as DOWN: Checkout API or RECOVERED: Checkout API, the time the outage or recovery was confirmed, a Reason: line on down alerts (for example HTTP 503 Service Unavailable), the measured outage length on recovery, and the redacted target (for HTTP monitors only the host). If you use repeat reminders, STILL DOWN messages are posted until the incident is acknowledged or recovers.

Several channels

Add one Slack destination per channel. On Pro and higher, use routing rules to send, for example, database monitors to #db-alerts and everything tagged checkout to #payments.

Troubleshooting

  • "Only owners, admins and operators of this workspace can add the Slack app": ask someone with one of those roles to choose Add to Slack.
  • "The installation link expired, was already used, or belongs to another signed-in account": start again with Add to Slack in the same browser where you are signed in.
  • "Your Slack user is not linked to an Uptime Tracker account yet" after clicking Acknowledge: follow the private link in that message, then click Acknowledge again.
  • "The endpoint is not a valid slack URL": the URL must start with https://hooks.slack.com/services/. Slack workflow or app URLs of other shapes are not accepted.
  • The test never appears: open Integrations → Deliveries. The Last error column shows the HTTP status and Slack's own error code, for example destination returned HTTP 410 (channel_is_archived), (channel_not_found), (no_service) for a revoked webhook or (action_prohibited). HTTP 403, 404 or 410 means the webhook was revoked, the app was removed or the channel was archived.
  • Destination disabled: after a permanent failure like the ones above, the destination is disabled with the reason and the workspace is told through its other destinations. Create a new webhook in Slack, then choose Edit connection on the destination, paste the new URL and choose Save connection: saving re-enables it. If you fixed the problem on Slack's side without a new URL (for example you unarchived the channel), choose Re-enable.
  • Move alerts to another channel: create a webhook for the new channel and use Edit connection to replace the URL. Routing rules that use the destination keep working.
  • Channels connected with Add to Slack have no Edit connection. To move one, choose Add another channel in the Slack app panel, then delete the old destination.

Mattermost and Rocket.Chat use Slack-compatible webhooks but have their own destination types on Pro; see Mattermost and Rocket.Chat.

FAQ

Frequently asked questions

Is Slack available on the Free plan?

Yes. Slack, Discord, Telegram, email and generic webhooks are all included on Free.

Can I acknowledge incidents from Slack?

Yes, with Add to Slack. Alerts carry an Acknowledge button; each person links their Slack user to their Uptime Tracker account once. Webhook-based Slack destinations have no buttons.

Can I alert different Slack channels for different monitors?

Yes. Add one destination per channel and use routing rules, available on Pro and higher, to decide which monitors go where.

Why was my Slack destination disabled?

Slack returned a permanent error, usually because the webhook or app was removed or the channel was archived. Integrations → Deliveries shows Slack's error code, such as channel_is_archived. Create a new webhook and paste it with Edit connection, which also re-enables the destination.

Uptime Tracker

Start monitoring in under five minutes

Start on the free plan — commercial use allowed. No credit card required.

  • Free forever plan
  • No credit card
  • Cancel anytime